{"id":379,"date":"2026-09-21T05:10:35","date_gmt":"2026-09-21T05:10:35","guid":{"rendered":"https:\/\/www.wellnessqualityinstitute.com\/articles\/supplier-compliance-plastic-content-2"},"modified":"2026-09-21T05:10:35","modified_gmt":"2026-09-21T05:10:35","slug":"supplier-compliance-plastic-content-2","status":"publish","type":"post","link":"https:\/\/www.wellnessqualityinstitute.com\/articles\/supplier-compliance-plastic-content-2","title":{"rendered":"Supplier Compliance for Plastic Content: A US Brand Guide"},"content":{"rendered":"<p><em>Written by: Scott Steveson, Specialist, Wellness Quality Institute<\/em><\/p>\n<h2 id=\"key-takeaways\">Key Takeaways for US Brands<\/h2>\n<ul>\n<li>US brands face expanding state and international recycled-content and EPR requirements, and most supplier documents cannot support the claims regulators and retailers now demand.<\/li>\n<li>Self-declarations and Certificates of Analysis are the most common supplier documents yet provide the weakest evidence; regulators are shifting toward third-party validation and accredited lab data.<\/li>\n<li>Four evaluation questions about jurisdiction and threshold, document type, testing method and detection floor, and scope determine whether any supplier document can actually support a regulatory claim.<\/li>\n<li>Key technical concepts such as detection floor, polymer panel, blank controls, and method suitability explain why a \u201cnone detected\u201d result is not proof of absence and why single-lot results cannot be extended across product lines.<\/li>\n<li>The Wellness Quality Institute helps brands turn existing laboratory data into verified, defensible claims through its Plastic-Free Pathway Verification program.<\/li>\n<\/ul>\n<p><a href=\"https:\/\/www.wellnessqualityinstitute.com\" class=\"solid-button\" target=\"_blank\">See how Plastic-Free Pathway Verification turns your lab reports into defensible claims.<\/a><\/p>\n<h2>A Simple Framework for Evaluating Supplier Evidence<\/h2>\n<p>This four-part lens helps you evaluate any supplier document before you rely on it. Apply these questions to every item in a supplier compliance file:<\/p>\n<ol>\n<li><strong>Regulatory jurisdiction and threshold:<\/strong> Identify the specific law or requirement this document addresses, and confirm it meets the numeric threshold for that jurisdiction.<\/li>\n<li><strong>Document type and what it proves:<\/strong> Identify whether it is an accredited lab report, a Certificate of Analysis, a supplier self-declaration, or a chain-of-custody certificate, then match that document type to what it can actually establish.<\/li>\n<li><strong>Testing method and detection floor:<\/strong> Confirm which analytical method was used, which particle sizes or compounds it detects, and the reporting limit below which nothing appears in the report.<\/li>\n<li><strong>Scope of the claim versus scope of the evidence:<\/strong> Check whether the document covers the specific product, lot, production period, and polymer types that the claim references, instead of stretching a single result beyond what the data supports.<\/li>\n<\/ol>\n<p>These four questions form the backbone of the document-by-document analysis that follows.<\/p>\n<h2>Key Terms for Plastic and Recycled Content Claims<\/h2>\n<p>These definitions use common regulatory and scientific language, translated into everyday terms for brands and business owners.<\/p>\n<p><strong>Post-consumer recycled (PCR) content<\/strong> is material that a consumer used and discarded, which was then collected, processed, and turned back into manufacturing feedstock. Most state recycled-content laws measure this category.<\/p>\n<p><strong>Post-industrial recycled (PIR) content<\/strong>, also called pre-consumer recycled content, is manufacturing scrap or trim waste that gets reprocessed before it ever reaches a consumer. Under the EU PPWR, PIR content does not count toward PCR thresholds, which are limited to post-consumer recycled content.<\/p>\n<p><strong>Recycled content<\/strong> is a broad term that can include both PCR and PIR. When a regulation specifies \u201cpost-consumer recycled,\u201d PIR cannot substitute for PCR.<\/p>\n<p><strong>Plastic content<\/strong> means the presence of plastic polymers such as polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS), PVC, nylon, and similar materials in a product or package.<\/p>\n<p><strong>Microplastics<\/strong> are plastic particles smaller than 5 millimeters. They are large enough at the upper end of that range for current lab methods to count and chemically identify them.<\/p>\n<figure style=\"text-align: center\"><img decoding=\"async\" src=\"https:\/\/cdn.aigrowthmarketer.co\/1784829410323-fb401fc7b1e4.webp\" alt=\"Colorful plastic fragments in water inside a laboratory petri dish.\" style=\"max-height: 500px\" loading=\"lazy\"><figcaption><em>Microplastics are particles smaller than five millimeters. Current methods can count and identify them at the upper end of that range, but reliable measurement falls away as particles get smaller \u2014 a limit that shapes every honest claim.<\/em><\/figcaption><\/figure>\n<p><strong>Nanoplastics<\/strong> are particles smaller than 1 micrometer. Current commercial lab methods cannot reliably measure them.<\/p>\n<p><strong>Detection floor<\/strong>, also called reporting limit or limit of detection, is the lowest concentration or particle size a method can reliably detect and report. A \u201cnone detected\u201d result means nothing was found above this floor.<\/p>\n<p><strong>Chain of custody<\/strong> is the documented trail that shows how a material moved from its source through processing to the final product. It allows auditors to trace and verify claimed recycled content.<\/p>\n<p>Those definitions matter because the compliance landscape has shifted from voluntary sustainability reporting toward mandatory recycled-content thresholds and substance restrictions. <a href=\"https:\/\/standardium.com\/en\/recyclass-requirements-standards-and-audit-process\" target=\"_blank\" rel=\"noindex nofollow\">EN 15343 provides a traceability and conformity assessment standard for recycled plastics<\/a>, and ISO\/IEC 17025 sets requirements for laboratory competence. These standards act as reference points. US state-level recycled-content laws add an emerging and fragmented layer, with no federal US standard for plastic content claims and no single gold standard for microplastic content verification.<\/p>\n<h2>Requirement-To-Document Mapping for Key Regulations<\/h2>\n<p>The table below maps major regulations to their jurisdiction, core requirement, and the supplier documentation that addresses each. California\u2019s framework serves as a technical reference point for many programs. Read across the \u201cRequired Supplier Document\u201d column and you will see that no single document type satisfies every jurisdiction, so mapping requirements to documents remains a separate compliance task.<\/p>\n<table>\n<thead>\n<tr>\n<th>Regulation<\/th>\n<th>Jurisdiction<\/th>\n<th>Key Requirement<\/th>\n<th>Required Supplier Document<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><a href=\"https:\/\/calrecycle.ca.gov\/\" target=\"_blank\" rel=\"noindex nofollow\">California SB 54 (effective May 1, 2026)<\/a><\/td>\n<td>California (EPR framework; technical reference nationally)<\/td>\n<td>Single-use packaging must be recyclable or compostable by 2032. Target plastic recycling rate is 65 percent. Source reduction target is 25 percent by 2032. <a href=\"https:\/\/bdlaw.com\/publications\/californias-packaging-epr-deadlines-are-approaching-what-producers-need-to-know-about-source-reduction-reporting\" target=\"_blank\" rel=\"noindex nofollow\">Interim milestones apply from 2027 through 2030<\/a>.<\/td>\n<td>Producer registration with CAA or CalRecycle, annual supply and source reduction reports, and packaging composition data by weight and component.<\/td>\n<\/tr>\n<tr>\n<td><a href=\"https:\/\/calrecycle.ca.gov\/\" target=\"_blank\" rel=\"noindex nofollow\">California AB 793 (25% PCR from Jan 1, 2025; 50% by Jan 1, 2030)<\/a><\/td>\n<td>California (beverage containers subject to California Redemption Value)<\/td>\n<td>Minimum post-consumer recycled plastic content in plastic beverage containers with <a href=\"https:\/\/repurpose.global\/blog\/pcr-laws-explained-a-state-by-state-guide-for-brands-in-2026\" target=\"_blank\" rel=\"noindex nofollow\">annual reporting by March 1<\/a> and <a href=\"https:\/\/govbuddy.com\/california\/bills\/sb-633\" target=\"_blank\" rel=\"noindex nofollow\">third-party validation of PCR content required by March 1, 2028 under SB 633<\/a>.<\/td>\n<td>Annual report listing pounds of virgin and PCR plastic by resin type, accredited third-party PCR content validation from 2028, and supplier PCR resin certifications.<\/td>\n<\/tr>\n<tr>\n<td><a href=\"https:\/\/repurpose.global\/blog\/pcr-laws-explained-a-state-by-state-guide-for-brands-in-2026\" target=\"_blank\" rel=\"noindex nofollow\">State Recycled-Content Laws (NJ, WA, ME, CT, CO, MN)<\/a><\/td>\n<td>Multiple US states<\/td>\n<td>Escalating PCR minimums for plastic beverage containers and packaging, such as <a href=\"https:\/\/repurpose.global\/blog\/pcr-laws-explained-a-state-by-state-guide-for-brands-in-2026\" target=\"_blank\" rel=\"noindex nofollow\">WA: 25% by 2026, 50% by 2031<\/a>, <a href=\"https:\/\/trinityconsultants.com\/resources\/nj-recycled-content-law\" target=\"_blank\" rel=\"noindex nofollow\">NJ: 15% beverage containers from 2024<\/a>, and <a href=\"https:\/\/repurpose.global\/blog\/pcr-laws-explained-a-state-by-state-guide-for-brands-in-2026\" target=\"_blank\" rel=\"noindex nofollow\">CT: 25% by Jan 1, 2027<\/a>, plus annual registration and reporting.<\/td>\n<td>Annual PCR reports by resin type and weight, supplier PCR resin certifications or declarations, methodology documentation for state-specific allocation, and chain-of-custody certificates where required.<\/td>\n<\/tr>\n<tr>\n<td><a href=\"https:\/\/www.canada.ca\/en\/environment-climate-change\/services\/managing-reducing-waste\/reduce-plastic-waste\/federal-plastics-registry.html\" target=\"_blank\" rel=\"noindex nofollow\">Canada Federal Plastics Registry (2025 data due Sept 29, 2026)<\/a><\/td>\n<td>Canada (federal; <a href=\"https:\/\/atlanticworks.ca\/blog\/epr-packaging-compliance-shopify-canada\" target=\"_blank\" rel=\"noindex nofollow\">producers placing \u22651,000 kg plastic on Canadian market<\/a>)<\/td>\n<td>Report resin type, resin source such as virgin fossil-based, virgin bio-based, PCR, or PIR, and quantities manufactured or imported and placed on market by province, and <a href=\"https:\/\/clearyst.com\/resources\/federal-plastics-registry-canada-reporting-guide\" target=\"_blank\" rel=\"noindex nofollow\">retain records three years<\/a>.<\/td>\n<td>Supplier material declarations specifying resin type (NAPCS code) and resin source, weight data by component, provincial allocation methodology, and supporting calculations.<\/td>\n<\/tr>\n<tr>\n<td><a href=\"https:\/\/omm.com\/insights\/alerts-publications\/2026-plastics-epr-packaging-rules-update-what-sb-54-sb-343-state-reporting-deadlines-prc-laws-the-eu-ppwr-mean-for-producers-retailers\" target=\"_blank\" rel=\"noindex nofollow\">EU PPWR (Regulation (EU) 2025\/40, general application Aug 12, 2026) \u2014 context for US brands with EU exposure<\/a><\/td>\n<td>EU (all member states; applies to importers placing packaging on EU market)<\/td>\n<td><a href=\"https:\/\/usbcertification.com\/services\/industrial-certification\/ppwr-compliance-eu-packaging-and-packaging-waste-regulation\" target=\"_blank\" rel=\"noindex nofollow\">PCR content minimums from 2030, such as 30% for single-use PET bottles<\/a>, a <a href=\"https:\/\/tracextech.com\/pfas-in-food-packaging\" target=\"_blank\" rel=\"noindex nofollow\">PFAS ban in food-contact packaging from Aug 12, 2026<\/a>, <a href=\"https:\/\/ideagen.com\/thought-leadership\/blog\/ppwr-supplier-requirements-what-you-need-to-collect\" target=\"_blank\" rel=\"noindex nofollow\">Declaration of Conformity per packaging type<\/a>, and <a href=\"https:\/\/euverify.com\/resource\/pfas-in-packaging\" target=\"_blank\" rel=\"noindex nofollow\">technical file retention for five to ten years<\/a>.<\/td>\n<td>EN 15343 chain-of-custody certificates or equivalent, accredited lab Certificates of Analysis for PFAS and heavy metals, Declaration of Conformity, recyclability assessment, and supplier material composition declarations with CAS numbers.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>What Each Supplier Document Actually Proves<\/h2>\n<h3>Supplier Self-Declaration<\/h3>\n<p>A supplier self-declaration is a written statement from a supplier that a material meets a specified requirement, such as a resin containing 25 percent PCR content. Self-declarations appear in almost every supplier file and provide the least reliable evidence.<\/p>\n<p>A self-declaration proves only that the supplier made the claim. It does not verify the underlying data, testing method, chain of custody, or calculation method. <a href=\"https:\/\/regilient.ai\/blog\/supplier-declaration-audits-how-regulators-detect-false-compliance\" target=\"_blank\" rel=\"noindex nofollow\">A 23 percent non-compliance rate in a regulatory pilot project came from manufacturers trusting supplier declarations without verification<\/a>.<\/p>\n<p>Regulators and standards bodies now treat self-declarations as a starting point. <a href=\"https:\/\/govbuddy.com\/california\/bills\/sb-633\" target=\"_blank\" rel=\"noindex nofollow\">California\u2019s SB 633 requires beverage manufacturers to provide CalRecycle with third-party validation of PCR content beginning March 1, 2028<\/a>, and <a href=\"https:\/\/repurpose.global\/blog\/pcr-laws-explained-a-state-by-state-guide-for-brands-in-2026\" target=\"_blank\" rel=\"noindex nofollow\">Connecticut\u2019s HB 6664 already requires independent third-party certification of PCR content claims<\/a>. Across jurisdictions, the direction of travel is toward independent validation.<\/p>\n<h3>Certificate of Analysis (CoA)<\/h3>\n<p>A Certificate of Analysis is a document from a laboratory that reports test results for a specific sample. It carries more weight than a self-declaration because it reflects actual lab work, yet it still has limits.<\/p>\n<p>A CoA reports what a lab found using a particular method on a particular sample at a particular time. It does not confirm that the method fits the product matrix, that blank controls ruled out contamination, that reporting limits match the claim, or that the result applies beyond the tested lot. <a href=\"https:\/\/pakfactory.com\/blog\/how-to-test-packaging-for-pfas\" target=\"_blank\" rel=\"noindex nofollow\">A valid CoA must name the test method, state the result against the applicable limit, and identify an ISO\/IEC 17025-accredited laboratory; missing any of these elements weakens the proof<\/a>.<\/p>\n<p>For microplastics, <a href=\"https:\/\/www.waterboards.ca.gov\/\" target=\"_blank\" rel=\"noindex nofollow\">the California State Water Board\u2019s infrared method (SWB-MP1-rev1) detects particles greater than 50 \u00b5m through 5,000 \u00b5m, and the Raman method (SWB-MP2-rev1) detects particles greater than 20 \u00b5m through 5,000 \u00b5m<\/a>. A \u201cnone detected\u201d result under either method means no particles were found above those size thresholds, for the polymers screened, in the lot tested. The 1\u201320 \u00b5m fraction is not validated under either method, and everything below 20 \u00b5m sits beyond reliable commercial measurement.<\/p>\n<figure style=\"text-align: center\"><img decoding=\"async\" src=\"https:\/\/cdn.aigrowthmarketer.co\/1784829388732-c6255482b477.webp\" alt=\"Fragments of plastic suspended in blue water below the surface.\" style=\"max-height: 500px\" loading=\"lazy\"><figcaption><em>Plastic doesn&#039;t disappear \u2014 it fragments. These secondary microplastics are the breakdown products of everyday objects, and independent research now detects them across the water supply. Detection, though, establishes presence, not absence.<\/em><\/figcaption><\/figure>\n<h3>Accredited Laboratory Report<\/h3>\n<p>An accredited laboratory report is a CoA issued by a lab whose competence has been independently assessed. Preferred options include <a href=\"https:\/\/www.waterboards.ca.gov\/\" target=\"_blank\" rel=\"noindex nofollow\">California ELAP accreditation for the applicable State Water Board microplastics method<\/a> or <a href=\"https:\/\/www.iso.org\/\" target=\"_blank\" rel=\"noindex nofollow\">ISO\/IEC 17025 accreditation with the specific method and matrix listed in scope<\/a>.<\/p>\n<figure style=\"text-align: center\"><img decoding=\"async\" src=\"https:\/\/cdn.aigrowthmarketer.co\/1784829434095-0fc8fbcf29fa.webp\" alt=\"Scientists in white coats working with samples and microscopes in a laboratory.\" style=\"max-height: 500px\" loading=\"lazy\"><figcaption><em>Only a small number of laboratories can genuinely test for microplastics, and capability varies by instrument and method. WQI reviews a company&#039;s existing third-party laboratory data against a defined standard \u2014 it does not run the tests itself.<\/em><\/figcaption><\/figure>\n<p>Accreditation confirms that the lab follows defined quality and competence standards. It does not guarantee that the chosen method fits your product or that reporting limits align with the regulatory threshold you must meet.<\/p>\n<h3>Chain-of-Custody Documentation<\/h3>\n<p>Chain-of-custody documentation traces a material from its source through processing to the final product. For recycled-content claims, this documentation makes a PCR percentage auditable.<\/p>\n<p><a href=\"https:\/\/standardium.com\/en\/recyclass-requirements-standards-and-audit-process\" target=\"_blank\" rel=\"noindex nofollow\">EN 15343 sets requirements for traceability of recycled plastics, including volume reconciliation, production records, and supplier documentation<\/a>. Without chain-of-custody documentation, a claimed PCR percentage rests entirely on the supplier\u2019s word.<\/p>\n<h3>Regulatory Jurisdiction Mapping<\/h3>\n<p>Each jurisdiction sets its own evidence rules, so a document that satisfies one requirement may fall short elsewhere. A supplier declaration that works for Canada\u2019s Federal Plastics Registry may not meet California AB 793\u2019s third-party validation rule. A CoA that satisfies Washington\u2019s annual PCR report may not meet the EU PPWR chain-of-custody expectations.<\/p>\n<p>Jurisdiction mapping means identifying which document satisfies each specific requirement. Many brands have not yet completed this mapping, which leaves gaps in their compliance story.<\/p>\n<p><a href=\"https:\/\/www.wellnessqualityinstitute.com\" class=\"solid-button\" target=\"_blank\">Not sure which document satisfies which jurisdiction? Get your evidence mapped.<\/a><\/p>\n<h2>Required Data Fields in a Supplier Declaration<\/h2>\n<p>A supplier declaration for plastic content must include specific data fields before it can support regulatory claims. Generic \u201ccompliant\u201d statements do not meet that bar. At minimum, a useful declaration should include:<\/p>\n<ul>\n<li><strong>Plastic percentage:<\/strong> Total plastic content by weight, stated as a percentage of the packaging unit or component.<\/li>\n<li><strong>Resin type:<\/strong> Specific polymer identification such as PET, HDPE, PP, PS, or PVC, using recognized codes like NAPCS for Canadian reporting.<\/li>\n<li><strong>PCR percentage:<\/strong> Post-consumer recycled content as a percentage of total plastic, clearly separated from post-industrial recycled content, with the calculation basis stated.<\/li>\n<li><strong>PFAS and additive declarations:<\/strong> Explicit statement on whether PFAS, a class of synthetic chemicals used in coatings and treatments, are intentionally added, plus supporting test data for food-contact uses.<\/li>\n<li><strong>Testing method:<\/strong> The analytical method used, such as SWB-MP2-rev1 Raman spectroscopy, FTIR, or LC-MS\/MS for PFAS, along with the lab\u2019s accreditation status and whether the method and matrix fall within scope.<\/li>\n<li><strong>Reporting limits:<\/strong> The detection floor for each analyte, meaning the lowest concentration or particle size the method can reliably detect and report.<\/li>\n<li><strong>Regulatory jurisdiction:<\/strong> The specific regulations the declaration addresses, such as California AB 793, Washington 70A.245 RCW, or Canada\u2019s Federal Plastics Registry, including the threshold and reporting period.<\/li>\n<\/ul>\n<h2>Evidence Requirements by Product Category<\/h2>\n<p>Evidence needs and risk levels vary by product category, so brands should focus first where exposure is highest.<\/p>\n<p><strong>Food-contact packaging<\/strong> carries the heaviest evidence burden. <a href=\"https:\/\/tracextech.com\/pfas-in-food-packaging\" target=\"_blank\" rel=\"noindex nofollow\">PFAS restrictions apply from August 12, 2026 under the EU PPWR for brands with EU exposure<\/a>, and several US states already restrict intentionally added PFAS in food packaging. <a href=\"https:\/\/pakfactory.com\/blog\/how-to-test-packaging-for-pfas\" target=\"_blank\" rel=\"noindex nofollow\">A supplier\u2019s \u201cPFAS-free\u201d claim requires lab testing from an ISO\/IEC 17025-accredited laboratory to be credible<\/a>. For recycled-content claims in food-contact applications, chemical contamination risks from recycled feedstocks add a separate verification layer beyond the PCR percentage.<\/p>\n<p><strong>Plastic beverage containers<\/strong> sit at the center of US state PCR laws. <a href=\"https:\/\/repurpose.global\/blog\/pcr-laws-explained-a-state-by-state-guide-for-brands-in-2026\" target=\"_blank\" rel=\"noindex nofollow\">California AB 793, Washington\u2019s law, New Jersey\u2019s law, Maine LD 1467, and Connecticut HB 6664 all impose PCR thresholds and annual reporting on beverage container producers<\/a>. As noted with SB 633 and Connecticut\u2019s rule, the trend moves toward third-party validation of PCR content.<\/p>\n<p><strong>General CPG packaging<\/strong> faces a growing but somewhat lower evidence burden. SB 54\u2019s EPR framework covers a wide range of single-use packaging, and state recycled-content laws keep expanding. The main risk for general CPG brands comes from stretching a single product\u2019s recycled-content result across a full product line without matching scope documentation.<\/p>\n<h2>The Evidence-Quality Problem: Core Concepts<\/h2>\n<p>Several technical ideas determine whether supplier documentation can support a regulatory claim. Clear understanding of these ideas separates a file that survives scrutiny from one that fails.<\/p>\n<p><strong>Detection floor versus absence.<\/strong> Finding a substance involves isolating it, confirming its identity, and reporting it. Proving that no substance is present requires ruling out everything the method cannot see, including particles below the detection floor, polymers outside the tested panel, and production lots that were never sampled. <a href=\"https:\/\/nature.com\/articles\/s44172-026-00639-y\" target=\"_blank\" rel=\"noindex nofollow\">A 2026 study in Nature Communications Engineering reports that no existing analytical technique can accurately determine the percentage of recycled plastic content in a finished plastic product<\/a>. A \u201cnone detected\u201d result always sits within the bounds of the method, polymer panel, and lot tested.<\/p>\n<p><strong>Polymer panel.<\/strong> A polymer panel lists the plastic types a lab screens for in a test. A \u201cnone detected\u201d result applies only to polymers on that list. Polymers outside the panel remain unreported because the lab did not test for them.<\/p>\n<p><strong>Blank controls.<\/strong> Blank controls are samples that run through the same procedure without the test material. They reveal contamination from the lab environment or equipment. Without documented blanks, a lab report cannot rule out contamination as the source of a result.<\/p>\n<p><strong>Method suitability for matrix.<\/strong> A method validated for drinking water may not suit a food product, a beverage with solids, or a packaging material. Using a method outside its validated matrix produces results that are hard to interpret reliably.<\/p>\n<p><strong>Lot-to-lot variability.<\/strong> A clean result on one production lot does not guarantee the next lot. Recycled feedstocks and manufacturing conditions change, so a single test result functions as a snapshot rather than a standing guarantee.<\/p>\n<h2>Practical Assessment Checklist for Supplier Files<\/h2>\n<p>This checklist helps you review any supplier\u2019s plastic-content documentation in a structured way.<\/p>\n<h3>Technical<\/h3>\n<ul>\n<li>Is the testing laboratory accredited, such as ISO\/IEC 17025 with method and matrix in scope, or California ELAP where applicable?<\/li>\n<li>Is the analytical method appropriate for the product matrix?<\/li>\n<li>Are the tested particle-size range and polymer panel clearly reported?<\/li>\n<li>Are reporting limits stated for each analyte?<\/li>\n<li>Were blank controls and contamination controls run and documented?<\/li>\n<li>Is chain-of-custody documentation present and traceable to the tested lot?<\/li>\n<\/ul>\n<h3>Operational<\/h3>\n<ul>\n<li>Does the supplier declaration capture plastic percentage, resin type, PCR percentage, PFAS and additive declarations, testing method, reporting limits, and regulatory jurisdiction?<\/li>\n<li>Is the data recent, such as within 24 months of the current production period?<\/li>\n<li>Are data fields stated by weight instead of generic material names?<\/li>\n<\/ul>\n<h3>Regulatory<\/h3>\n<ul>\n<li>Which jurisdiction\u2019s requirement does this document address, such as SB 54, AB 793, a state recycled-content law, Canada\u2019s Federal Plastics Registry, or the EU PPWR?<\/li>\n<li>Does the document meet the applicable threshold for that jurisdiction and reporting period?<\/li>\n<li>Does the document clearly distinguish PCR from PIR content?<\/li>\n<\/ul>\n<h3>Reputational<\/h3>\n<ul>\n<li>Can the claim be substantiated if a regulator, retailer, or litigant challenges it?<\/li>\n<li>Is the evidence independent or entirely self-reported?<\/li>\n<li>Does the claim stay within the scope of the reviewed data?<\/li>\n<\/ul>\n<h2>Current Practices and Emerging Norms<\/h2>\n<p>The checklist above describes what to look for, and current practice shows how often suppliers actually provide it. Current best practice in supplier documentation comes down to four moves. Request accredited lab data, specify the testing method and reporting limits in supplier agreements, require chain-of-custody documentation, and prioritize high-risk vendors such as food-contact and single-use components first.<\/p>\n<p>Many brands already hold useful lab data yet lack a trusted way to translate it into claims they can defend. Self-reported results often get dismissed as marketing, while brands sit on reports they do not fully understand. A result that reads \u201cno microplastics detected,\u201d for example, reflects the detection-floor limitation described earlier, and most teams have never reviewed that method detail.<\/p>\n<p>The Wellness Quality Institute operates a program called Plastic-Free Pathway Verification (PFPV), governed by the standard WQI-CS-01, that independently reviews a company\u2019s existing lab dataset, testing methodology, product scope, and controls against defined criteria aligned with the California State Water Board\u2019s drinking-water microplastics framework. The Wellness Quality Institute does not run lab tests and does not certify that any product is free of plastic.<\/p>\n<p>Every review produces one of two outcomes. Standard Met carries a verification decision, a scope-locked license to use the WQI mark, a public registry listing, and approved claim language. Standard Not Met is a private outcome that a company can resubmit with updated information. Verification applies only to the reviewed product, dataset, tested particle-size range, polymer panel, and production period.<\/p>\n<p>A single assessment fee covers review, verification decision, and registry listing, while laboratory testing is arranged and billed separately by a qualified independent lab.<\/p>\n<h2>Common Mistakes and Misinterpretations<\/h2>\n<p>These recurring errors appear in supplier compliance files and in the claims brands make based on them.<\/p>\n<ul>\n<li><strong>Treating \u201cnone detected\u201d as proof of absence.<\/strong> Detection-floor limitations described earlier remain invisible without method review, so a \u201cnone detected\u201d result still sits within those bounds.<\/li>\n<li><strong>Assuming a Certificate of Analysis verifies method suitability.<\/strong> A CoA reports what a lab found and does not confirm that the method fits the matrix, that blanks were run, or that reporting limits match the claim.<\/li>\n<li><strong>Conflating PCR with PIR or pre-consumer with post-consumer.<\/strong> These streams receive different regulatory treatment, and most US state laws and the EU PPWR count only post-consumer recycled content toward mandatory thresholds.<\/li>\n<li><strong>Extending a single product\u2019s result across a product line or company.<\/strong> Scope-lock rules exist because one dataset cannot support company-wide or product-line claims, and regulators and retailers now look for this error.<\/li>\n<li><strong>Assuming recycled plastic is automatically safer for food contact.<\/strong> <a href=\"https:\/\/enviliance.com\/regions\/others\/global\/report_15912\" target=\"_blank\" rel=\"noindex nofollow\">The OECD\u2019s analysis of chemical content validation for recycled plastics notes that substances of concern may remain or accumulate in recycled plastics and in some cases result in higher toxicity than virgin plastics<\/a>, so treat recycled content and chemical safety as separate questions.<\/li>\n<li><strong>Treating a supplier self-declaration as full substantiation.<\/strong> As noted with SB 633 and EN 15343, regulators and standards increasingly expect third-party validation instead of relying on supplier statements alone.<\/li>\n<\/ul>\n<p><a href=\"https:\/\/www.wellnessqualityinstitute.com\" class=\"solid-button\" target=\"_blank\">Avoid the \u201cnone detected\u201d trap \u2014 have your data independently reviewed.<\/a><\/p>\n<h2>Frequently Asked Questions: Next Steps for Brands<\/h2>\n<h3>Which Evidence Should I Request First?<\/h3>\n<p>For a plastic beverage container, start with supplier PCR resin certifications, an accredited lab report or CoA that states method and reporting limits, and any chain-of-custody documentation. For a food-contact wrapper or package, begin with PFAS and additive test reports from an accredited lab, then gather recycled-content documentation.<\/p>\n<h3>How Do I Align Documents With Different Jurisdictions?<\/h3>\n<p>Use the requirement-to-document table as a checklist, then build a simple map that lists each jurisdiction, its threshold, and the document that supports it. Where one document does not satisfy all needs, flag that gap and request additional evidence from the supplier.<\/p>\n<h3>When Should I Consider Third-Party Verification?<\/h3>\n<p>Consider independent verification when a claim appears on-pack, in marketing, or in retailer submissions, or when a jurisdiction such as California or Connecticut explicitly requires third-party validation. As with the direction signaled by SB 633, the market is moving toward verified claims for higher-risk categories.<\/p>\n<section data-read-next=\"true\">\n<h2>Read Next<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.wellnessqualityinstitute.com\/articles\/supplier-verification-requirements-plastic-claims\" target=\"_blank\">Supplier Verification Checklist for Plastic Claims<\/a><\/li>\n<li><a href=\"https:\/\/www.wellnessqualityinstitute.com\/articles\/plastic-claim-verification-program\" target=\"_blank\">Plastic Claim Verification Programs: A Brand Guide<\/a><\/li>\n<li><a href=\"https:\/\/www.wellnessqualityinstitute.com\/articles\/verification-programs-plastic-reduction-claims\" target=\"_blank\">Plastic Reduction Claim Verification: What US Brands Need<\/a><\/li>\n<li><a href=\"https:\/\/www.wellnessqualityinstitute.com\/articles\/require-verified-plastic-claims-suppliers\" target=\"_blank\">How to Require Verified Plastic Claims from Suppliers<\/a><\/li>\n<li><a href=\"https:\/\/www.wellnessqualityinstitute.com\/articles\/verify-plastic-reduction-claims\" target=\"_blank\">How to Verify Plastic Reduction Claims: A 5-Step Audit<\/a><\/li>\n<\/ul>\n<\/section>\n","protected":false},"excerpt":{"rendered":"<p>The Wellness Quality Institute&#8217;s document-by-document guide helps US brands verify supplier plastic content claims and stay compliant. Start here.<\/p>\n","protected":false},"author":118,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"inline_featured_image":false,"footnotes":""},"categories":[3],"tags":[],"class_list":["post-379","post","type-post","status-publish","format-standard","hentry","category-certification"],"_links":{"self":[{"href":"https:\/\/www.wellnessqualityinstitute.com\/articles\/wp-json\/wp\/v2\/posts\/379","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.wellnessqualityinstitute.com\/articles\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.wellnessqualityinstitute.com\/articles\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wellnessqualityinstitute.com\/articles\/wp-json\/wp\/v2\/comments?post=379"}],"version-history":[{"count":0,"href":"https:\/\/www.wellnessqualityinstitute.com\/articles\/wp-json\/wp\/v2\/posts\/379\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.wellnessqualityinstitute.com\/articles\/wp-json\/wp\/v2\/media?parent=379"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.wellnessqualityinstitute.com\/articles\/wp-json\/wp\/v2\/categories?post=379"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.wellnessqualityinstitute.com\/articles\/wp-json\/wp\/v2\/tags?post=379"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}